Documentation

How to set up a printer on my DoorDash Merchant tablet?

Français

Here’s a guide to printing orders you receive from DoorDash.

3 connection interfaces to choose from:

If you need further assistance, you can contact our support free.

Compatible printers

You can set up automatic printing with one of the Expedy models below:

Expedy XPDY80EWBG , Expedy XPDY80EWBG-UK, Expedy XPDY80EWBG-US

How to connect the printer to a wired LAN

  • Connect the printer directly to the internet router using an Ethernet RJ45 network cable.

  • Connect the tablet to the same network.

  • Select the drop-down menu.

  • Allez dans Paramètres.
  • Select Add Printer.
  • To print receipts automatically, select Yesunder Automatic Receipt Printing and select the number of copies to print.

How to connect the printer via WiFi WPS

Step 1: To connect the printer to the network, press the WPS button in the LCD menu “.Start WiFi WPS”

https://www.youtube.com/watch?v=uzDNy3KhFQc
Configurer la connexion WiFi avec le WPS

Step 2: Press the WPS button on the access point or router.

Note: The procedure for using the access point or router varies depending on the device. When configuring, be sure to refer to the corresponding device documentation.

Step 3: When a network connection is established, the printer light stops blinking and stays solid green. On the printer’s LCD screen the network IP address is displayed and “server connected”.

Note: If the connection cannot be established, try to reconnect from the beginning of step 1.

How to connect the printer to WiFi manually (Direct WiFi AP)

Step1: Connect your cell phone or computer to the printer hotspot

  • Go to WiFi Settings,
  • Find DIRECT-XXX network, default password is 88888888
  • After successful connection, if the phone says you cannot access the Internet, you can ignore it.


If you are asked to maintain or log out, select maintain and do not log out.

Step2: Access the printer’s WiFi configuration page

Scan the QR code below with your phone or manually enter http://192.168.223.1 into the phone’s browser address bar to access the WiFi configuration page.

The SSID is the name of the WiFi network (respect upper and lower case, hyphens and underscores).

How to connect the printer via Bluetooth

Only Android

Step 1: Tap Settings on your tablet’s home screen and select Bluetooth.

Step 2: Turn on Bluetooth.

Step 3: Search for “Star Micronics” in the list of available devices

Step 4: Confirm the Bluetooth pairing request by entering the code 0000 (zero zero zero zero)

Step 5: Tap PAIR

The tablet is now connected to the printer.

Connect DoorDash tablet to printer

  1. Ensure your printer is turned on and tap Setup printer to begin.

  2. Tap Okay to allow your tablet to find your printer via Bluetooth or LAN.

  3. Tap Allow to continue the pairing process.

  4. Under Available Devices, tap on the printer name to pair it with your tablet.

  5. When your printer and tablet are successfully paired, you will see a Cover is close, ready to use message under Printer in Settings.

Français